Contact: Innovator Narayan Das Jethwani
0091 09232355432,
Email: sindhisss@yahoo.co.in Skype ID: Narayan das Jethwani India
Technology license for manufacturing & marketing
SEI- John Hooper Shutter/ Door/ Window Guard an Electronics Alarm Wireless System Direct fitting system no need of any type wiring
SEI- john Hooper now introduces a new compact electronics shutter/ door/ window guard this system can secure the main rolling shutter of shop/ office/ home/ bank/ etc. as per crime analysis 95% of the shop/ office/ bank burglaries take place by breaking or pulling by heavy jacks. Burglars are pulling out side the shutter and making the gape about 2 feet. And entering without open/ breaking locks stolen goods/cash. Shutter guard specially design for safety both type open or pulling. By un Authorized persons, as Pizzo based electronics circuit and compact sound producing device (not speaker) makes it ear piercing sound, possible to housing the entire system in just 9 ½” x 2/5" X 1 ¾” it can hide behind the main shutter from in side in few mints time.
Main Feature:
> Contact less, sensor makes it most reliable for million of operation.
> Battery consumption: at stand-by 1 micro amp.
> A pair of 9 volt Battery work more than year.
> Make an ear piercing alarm sound (about 120db at 100cmts.)
> Exit delay timer with LED Indicator
> Entry/ alert delay timer with LED indicator
> Built in Batt. OK with LED Indicator
> Arm an disarm with electronic Key lock
> Operation is very simple while coming out of shop/ office/ bank / home premises just switch on the shutter guard with key lock control. The exit delay of approximate 25 seconds starts automatically.
> There is enough time to shutdown, the rolling shutter locks it from outside and go home without any Tension. On returning open the lock, pull the Shutter; the shutter guard will become alert. It will wait for 10 seconds so as the allowed the owner/ authorized person to switch it of without alarm sounding. EMI/ RFI protection, stand-by batteries saving mode, above very simple installation.
> Please Note: entry and exit Time delay we can make change with value of component only.
> Cost of components in quantity approximates Indian Rs. 145=00 with battery,
(USD approximate) 3 $
> Assemble time 1- skill person can assemble in 30 mints time after some times of practice
> Possibility with wiring control so many door shutter window
> MRP For shutter/ door/ window guard: Rupees 2,800=00 (approximate USD 59.5$
0091 09232355432,
Email: sindhisss@yahoo.co.in Skype ID: Narayan das Jethwani India
Technology license for manufacturing & marketing
SEI- John Hooper Shutter/ Door/ Window Guard an Electronics Alarm Wireless System Direct fitting system no need of any type wiring
SEI- john Hooper now introduces a new compact electronics shutter/ door/ window guard this system can secure the main rolling shutter of shop/ office/ home/ bank/ etc. as per crime analysis 95% of the shop/ office/ bank burglaries take place by breaking or pulling by heavy jacks. Burglars are pulling out side the shutter and making the gape about 2 feet. And entering without open/ breaking locks stolen goods/cash. Shutter guard specially design for safety both type open or pulling. By un Authorized persons, as Pizzo based electronics circuit and compact sound producing device (not speaker) makes it ear piercing sound, possible to housing the entire system in just 9 ½” x 2/5" X 1 ¾” it can hide behind the main shutter from in side in few mints time.
Main Feature:
> Contact less, sensor makes it most reliable for million of operation.
> Battery consumption: at stand-by 1 micro amp.
> A pair of 9 volt Battery work more than year.
> Make an ear piercing alarm sound (about 120db at 100cmts.)
> Exit delay timer with LED Indicator
> Entry/ alert delay timer with LED indicator
> Built in Batt. OK with LED Indicator
> Arm an disarm with electronic Key lock
> Operation is very simple while coming out of shop/ office/ bank / home premises just switch on the shutter guard with key lock control. The exit delay of approximate 25 seconds starts automatically.
> There is enough time to shutdown, the rolling shutter locks it from outside and go home without any Tension. On returning open the lock, pull the Shutter; the shutter guard will become alert. It will wait for 10 seconds so as the allowed the owner/ authorized person to switch it of without alarm sounding. EMI/ RFI protection, stand-by batteries saving mode, above very simple installation.
> Please Note: entry and exit Time delay we can make change with value of component only.
> Cost of components in quantity approximates Indian Rs. 145=00 with battery,
(USD approximate) 3 $
> Assemble time 1- skill person can assemble in 30 mints time after some times of practice
> Possibility with wiring control so many door shutter window
> MRP For shutter/ door/ window guard: Rupees 2,800=00 (approximate USD 59.5$
Photo Of Device:-